Light Marin LM75
Newly designed model focused around light weight and high strength.
Total weight a of LM75 including 150hp engine is only 770kgs.
Rigid structure constructed from 3d sandwich composites with directional glass fiber matting, laid in strategic directions applying strength where needed, rather than extra weight and mass. Vacuum infused together with vinyl ester resin to create a super strong structure with the precise amount of resin applied where needed. Our LM75 has the same laminate calculation as a 14m racing boat, squeezed into a 7.5m rigid hull. Note: No wooden materials used in the construction, so no rot!.
Orca Hypalon tubes 1300dtex with 5 chambers including pressure release valves. Standard colours are Black, Light grey, Colonial Gold and Marine Blue. Special colours available on request.
The tubes are at the height of average waist in comparison to other manufactures at knee height. This unique design features raised tubes giving an incredible safe feeling inside the boat. Inside beam between tubes is 2.1m giving generous space to walk around the console and seating elements. Distance between the consoles and tubes, is 55cm giving more than enough space to pass by.
Fitted with an environmentally friendly Honda 4 stroke 150hp, she glides through the water reaching 43knots. Cruising speed is around 34knots with a full fuel tank (191ltrs) , two people and consuming 22ltr fuel per hour. Calculated to 0.63ltr per nautical mile.
Out with the family?. When the weather blows up unexpectedly, you have a stable ocean going RIB to get your family home safely.
Click on pictures to enlarge images
Highlights
- Better of the environment through less fuel consumption and more environmentally friendly construction methods
- Wider beam with more interior space – 2.1m in-between tubes
- Higher freeboard for increased inboard safety and comfort
- Constructed from 3d sandwich vacuum infusion resulting in a stronger and lighter construction – Technology copied from aerospace industry
- Made in Ängelholm, Sweden
- Tubes made from nothing but highest quality Hypalon material
- Barrier coat applied behind gelcoat for lifetime osmosis protection
- Same construction calculation as a 15m race boat
- Significant weight reduction from 3d infusion construction method
- 23 deg deep ‘v’ hull shape for wave slicing effect calculated together with braking suppression side steps
- Absolutely no wood used in the boat. Will never rot or water saturate
- PVC high density foam has a water absorption of 0.02% vertically nothing
- PVC foam volume has floating power of 1.2tons due to its low density
- Family layout with the hull performance of a racing RIB. So when the weather blows up, the family can ride home safely
SPECIFICATIONS
| Length including tubes | 7,5 m |
| Length waterline |
5,95 m |
| Interior freeboard depth | 0,82 m |
| Interior beam (between tubes) | 2,1 m |
| Weight without motor | 565 kg |
| Total beam |
2,9 m |
| Transport width |
2,5 m |
| Draft | 0,48 m |
| Tube diameter | 0,45 m |
| Max load |
2100 kg |
| CE marked | Yes |
| Max pers | 24 |
| Max hp Outboard (50 knop) | 200 hk. Higher speed and hp configurations available |
| Standard tube colours |
Black, Marine blue, Colonial gold, Grey |
View LM75 presentation (PDF)
Transportable
Even with a 150hp outboard engine mounted and 190Lt fuel inside the built-in tank, a LM75 will have a total weight of approx 980kg enabling her to be transported on a single axle trailer. Transport beam with the tubes de-inflated is 2.55m.
